Every extra cable on a servo axis is another connector to fail and another cost in the drag chain. The Hengstler ACURO AD37 is built around a single-cable idea: position data and power share the motor cable over a fully digital 4-wire ACURO link, or over DRIVE-CLiQ for Siemens-based drives. For machine builders, that means slimmer cable runs and simpler motor wiring.
The AD37 is also one of the most compact multiturn motor encoders in its class, with a mounting depth of just 29 mm. Resolution goes up to 24 bits per turn plus 12 bits of multiturn counting, it runs continuously at up to 12,000 rpm, and it operates from -40 °C to +115 °C, which suits motors that run hot. The encoder stores its own electronic data sheet, so the drive can identify the motor automatically, and a winding temperature sensor input removes yet another wire.
Where people work close to moving axes, safety matters. Beside the standard AD37, Hengstler offers safety versions (AD37S and AD37E) with EC type-examination certificates for SIL 2 and SIL 3 applications over ACURO link. These let you build documented safety functions such as safe speed or safe position directly on the motor feedback.
Frequently asked questions
What is the difference between AD37, AD37S and AD37E?
AD37 is the standard, non-safety version. AD37S and AD37E are the functional safety versions, with certificates for SIL 2 and SIL 3. Check the certificates in the Downloads tab, or ask us which one fits your safety concept.
Does the AD37 work with Siemens drives?
Yes. A DRIVE-CLiQ version is available for Siemens SINAMICS drive systems.
What resolution does the AD37 offer?
Up to 24 bits singleturn plus 12 bits (4,096 turns) multiturn, with 20-bit versions also available.
Where can I buy the Hengstler AD37 in Malaysia?
Celectric in Penang is an authorised Hengstler distributor and can quote, source and support the AD37 for customers across Malaysia and Southeast Asia.
