Signal Conditioners
Signal conditioners are instruments that can convert analog and digital signals so that they can be captured by higher-level systems. The analog signals (such as 4 to 20 mA DC and 1 to 5 V DC) can come from measuring equipment, and the digital signals (such as from RS-232C, RS-485, and contacts) can come from various measurement and control sensors in the field (thermocouple, RTD, transmitters, flow meters, load cells, and potentiometers), pneumatic instruments, and other devices.
Showing 1–24 of 121 results
MTT MS3782 Slim Plug-In PWM Converter
Converts DC current or voltage signals into PWM signals.
MTT MS3740 Slim Plug-In Signal Reverser
Converts DC current or voltage signals into DC signals inversely proportional to those signals.
MTT MS3720-01 Slim Plug-In Fast Response CT Transmitter
Calculates the RMS values of AC current signals from a CT and converts them into commonly used DC signals. This model features a fast response time of 20ms or less (0 to 90%).
MTT MS3044 Terminal Block Type High-Level Signal Conditioner
Converts DC current or voltage signals into commonly used DC signals. This model features a fast response time of 70µsec (0 to 90%).
MTT MS3701F Slim Plug-In Thermocouple Temperature Transmitter
Converts thermocouple inputs into commonly used DC signals. This model features a fast response time of 500μs or less (0 to 90%).
MTT MS3724HV Slim Plug-In High-Level Signal Conditioner (High Voltage Output Model)
Converts DC current or voltage signals into commonly used DC signals. This model features a maximum output voltage of 40V.
MTT MS3714 Slim Plug-In Limiter
Converts DC current or voltage signals into commonly used DC signals and limits the outputs to force them to fall within the range between user-defined upper and lower limits.
MTT MS3737LC Slim Plug-In Distributor (Non-Isolation between Input and Output)
Powers a two-wire transmitter and converts its 4 to 20mA signals into 1 to 5V or 4 to 20mA. No isolation between input and output.
Adtek ST-T Temperature Converter
DIN Mount Temperature converter
MTT MS3710-01 Slim Plug-In 4-Wire Potentiometer Transmitter
Detects changes in the resistance of four-wire potentiometers and converts them into commonly used DC signals.
MTT MS3010 Terminal Block Type Potentiometer Transmitter
Detects changes in the resistance of potentiometric sensors and converts them into commonly used DC signals.
MTT MS3020 Terminal Block Type CT Transmitter (RMS Calculation)
Calculates the rms values of AC current signals from a CT and converts them into commonly used DC signals.
MTT MS3704HI Slim Plug-In High-Level Signal Conditioner
Converts DC current or voltage signals into commonly used DC signals. This model features a connection of output load resistance up to 1KΩ.
MTT MS3008 Terminal Block Type Frequency/Analog Converter
Converts pulse train signals from flow sensors and the like into commonly used DC signals.
MTT MS3737 Slim Plug-In Distributor (Non-Isolation between Input and Output)
Powers a two-wire transmitter and converts its 4 to 20mA signals into 1 to 5V or 4 to 20mA. No isolation between input and output.
MTT MS3718 Slim Plug-In Frequency/Analog Converter (for Ultra Low Frequency)
Converts pulse train signals from flow sensors and the like into commonly used DC signals.
MTT RC3900 Signal Conditioner Mounting Chassis
Chassis for the MS3900 series signal conditioners
MTT MS3704SW Slim Plug-In High-Level Signal Conditioner
Built-in switches enable the selection of input and output from either 1 to 5V or 4 to 20mA.
MTT MS3707H Slim Plug-In HART Isolator
Signal Isolator with bidirectional HART communication signals.
Adtek ST-RL Frequency Converter
Frequency converter
MTT MS3710 Slim Plug-In Potentiometer Transmitter
Detects changes in the resistance of potentiometric sensors and converts them into commonly used DC signals.
MTT MS3702-01 Slim Plug-In 4-Wire RTD Temperature Transmitter
Converts 4-wire RTD inputs into commonly used DC signals.
MTT MS3007 Terminal Block Type Distributor (with Isolation)
Powers a two-wire transmitter and converts its 4 to 20mA signals into commonly used signals. This model can also be used as an isolator.
MTT MS3761 Slim Plug-In Adder
Receives two DC current or voltage signals and outputs a signal proportional to the sum of those signals.