WhatsApp Us -- Email Us

Hengstler ACURO AM34 Compact Absolute Servo Encoder

Hengstler ACURO AM34 Compact Absolute Servo Encoder

SKU: ACURO AM34

A 38 mm magnetic absolute encoder built for servomotors where every millimetre of motor length counts. Less than 20 mm installation depth, up to 12,000 rpm and 120 °C, with 16 to 20 bit singleturn and optional 12-bit multiturn over BiSS-C or SSI. Send us your motor shaft and interface details and we will confirm the right part number.

Category: Encoders

Price on request

Send us your requirement and we'll reply with a quotation and technical advice.

⏱ We reply within 1 working day. Specs & downloads ↓
🛠️
Lifetime technical support
🚚
Free domestic shipping
🎯
Calibration services

Follow Celectric's WhatsApp Channel →

Product details

Motor builders for AGVs and collaborative robots face the same squeeze: the motor has to get shorter, and the encoder is often what sets its length. The Hengstler ACURO AM34 solves that by mounting in under 20 mm of depth on a 38 mm housing, so the motor stays compact without losing feedback quality.

Inside, a magnetic sensing system reports absolute position from 16 to 20 bits per turn. The multiturn version adds 12 bits (4,096 revolutions), so every axis knows its position the moment power returns, with no homing run. For drives that need an independent safety channel, a version with 256 sin/cos periods per revolution alongside the digital signal is available. A built-in input for the motor winding temperature sensor saves running a separate cable.

Because the AM34 is designed to sit inside the motor housing, it is rated IP20 and relies on the motor for environmental protection. Wide mounting tolerances make it forgiving to install on a 6 mm or 8 mm shaft, using either a hub shaft or a 1:3 cone.

Frequently asked questions

What is the Hengstler AM34 used for?
It is the position feedback encoder inside compact servomotors, mainly for AGVs, cobots and other machines where motor length is limited.

Is the AM34 singleturn or multiturn?
Both are available. Singleturn gives 16 to 20 bit per revolution; multiturn adds 12 bits to count 4,096 turns.

Which interface should I choose, BiSS-C or SSI?
It depends on your servo drive. Tell us the drive model and we will match the interface.

Is there a functional safety version?
Yes. Hengstler publishes a separate Safety BiSS/SSI datasheet, and we will confirm the rating for your application from that document.

Who supplies the Hengstler AM34 in Malaysia?
Celectric is an authorised Hengstler distributor in Penang, supporting customers across Malaysia and Southeast Asia.

Series: ACURO AM34 (servo motor encoder)
Type: Magnetic absolute encoder, singleturn or multiturn
Housing diameter: 38 mm
Installation depth: Less than 20 mm
Shaft: 6 mm or 8 mm, hub shaft or 1:3 cone
Singleturn resolution: 16 to 20 bit (13 to 22 bit on request)
Multiturn: 12 bit / 4,096 revolutions (optional)
Interfaces: BiSS-C binary, BiSS-C with SinCos 1 Vpp, SSI binary + 1024 ppr RS422, SSI Gray
Max. speed: 12,000 rpm
Max. temperature: Up to 120 °C
Extras: Motor winding temperature sensor input, electronic data sheet
Protection: IP20 (mounted inside the motor)
Approvals: CE, RoHS, UL

Download Hengstler ACURO AM34 Absolute Encoder information here

Datasheet (Standard BiSS/SSI): AM34-BiSS_SSI_Standard-Datasheet_20260319_EN.pdf
Datasheet (Safety BiSS/SSI): AM34_Safety-BiSS_SSI-Datasheet-202505-EN.pdf
Installation Manual: AM34-BiSS_SSI-Inst-202601.pdf
EU Declaration of Conformity (AM34 5V): AM34_5V_EU-Conformity_D-582-027_DE-EN.pdf
EU Declaration of Conformity (AM34S/AM34E 5V): AM34S-AM34E_5V_EU-Conformity_D-582-056_DE-EN.pdf

Need the 3D model or the safety version details? Ask us and we will send the matching files.

Not sure this is the right instrument?

Tell us about your application and our engineers will recommend the right model.

Shopping Cart

Search 3,000+ products

Type a model number, brand or product type.

Popular categories
Can't find it? Tell us what you need. Request a Quote →