Contrec 103D.2

The Contrec 103D.2 is the standard wall-mount version of the 103D Input Flow Totalizer, supplied with cable glands already fitted for field wiring straight out of the box. It runs on external 9-28V DC power and works with turbine, positive displacement, and paddlewheel flowmeters, displaying live rate and cumulative total on its own weatherproof LCD.

Four opto-isolated alarm outputs give it more alarm points than the battery-only 102-series units, useful where high and low flow limits both need independent signaling out to a PLC or annunciator. The same IP67 watertight enclosure and internal electronics carry over from the rest of the 103D range, with two years of battery backup keeping programmed settings and totals safe through a power interruption.

Compatible MetersTurbine, positive displacement, and paddlewheel flowmeters
Frequency Range0.01Hz to 10kHz
Signal TypesSine wave (15mV min.), open collector, reed switch, or pulse
K-Factor Range0.000001 to 999,999 pulses per unit, programmable
Rate Display5-digit, 8.5mm (0.33in) LCD
Total Display7-digit, 10mm (0.4in) LCD
Power Supply9-28V DC external, 4mA max. draw
Backup Power2 internal lithium batteries, retain data for approx. 2 years during power loss
Outputs4 opto-isolated open-collector alarm outputs, 200mA/30V DC max., 0.8V DC typical saturated voltage
Enclosure ProtectionIP67 (NEMA 4X) watertight
Enclosure MaterialPolycarbonate and ABS
Cable EntryStandard cable glands, factory-fitted
Dimensions151mm (W) x 98mm (H) x 43mm (D)
Operating Temperature-20 to +60°C (-4 to +140°F)
ComplianceCE compliant
MountingWall mounting, standard cable glands fitted (.2 variant)

Download Contrec 103D.2 information here

Datasheet: Contrec_103D_Rate_Totaliser

Shopping Cart


Do you want to hide this popup?