FineTek EPF Doppler Ultrasonic Flow Meter
Dirty water defeats many flow meters. The FineTek EPF Doppler ultrasonic flow meter actually relies on particles and bubbles to measure, which makes it a natural fit for sewage, sludge and slurry lines, and it clamps on without cutting the pipe.
How It Works
The EPF sends an ultrasonic signal into the pipe. Particles or air bubbles in the liquid reflect the signal back with a frequency shift that depends on how fast they are moving. The meter converts that Doppler shift into velocity and, using the set flow profile, into flow rate. FineTek states a minimum particle or bubble size of 100 µm at a concentration of at least 75 ppm.
Key Features
- Non-contact, clamp-on measurement with no pipe cutting or disassembly
- Made for liquids carrying solids, impurities or air bubbles
- Display of instantaneous and totalised flow
- 4–20 mA, pulse and RS-485 Modbus outputs
- Menus in English, Traditional Chinese and Simplified Chinese
Applications
- Sewage and wastewater pipelines
- Sludge, mud and grinding slurries
- Viscous liquids and liquids with entrained air
- Pulp and paper, petrochemical and food plants
Frequently Asked Questions
When should I choose Doppler instead of transit-time?
When the liquid contains enough particles or bubbles to reflect the signal: FineTek specifies at least 100 µm in size and 75 ppm in concentration. For clean liquids, a transit-time meter such as the EPU is the better choice.
Does the EPF need a pipe shutdown to install?
No. It clamps onto the outside of the pipe.
What outputs does it have?
4–20 mA, pulse and RS-485 Modbus.
Celectric supplies FineTek instruments across Malaysia from Penang. Contact us for pricing, lead time and application advice.
