Dwyer Series TFP-GI Gas Turbine Flow Meter

Part Number: Series TFP-GI Category:

Email Us: sales@mycelectric.com
WhatsApp Us: +6016-551 9084

Series TFP-GI Gas Turbine Flow Meters are suitable for a wide variety of industrial, commercial, and laboratory flow applications. These meters utilize a turbine wheel and electro-optical detection to convert flow rates into a linear 0 to 5 VDC output signal for recording and data logging. A 3-1/2 digit LCD informs the user of the actual flow rate. A power adapter or mating cable assembly is required for operation.

Service : Clean dry gases compatible with wetted materials.

Wetted Materials : PPS, acetal, sapphire, glass, epoxy, and fluoroelastomer.

Accuracy : ±3% of full scale.

Linearity : ±3% of full scale.

Repeatability : ±0.5% of full scale.

Temperature Limits : 41 to 131°F (5 to 55°C); Storage: 32 to 158°F (0 to 70°C); Sensitivity: ±0.2% of full scale per °C.

Pressure Limits : 40 psig (2.8 bar).

Process Connection : Compression fitting, see Catalog page.

Power Requirements : 11.5 to 15 VDC.

Power Consumption : 35 mA @ 12 VDC.

Output Signal : 0 to 5 VDC: Minimum 2.5 kΩ load.

Electrical Connections : Four-pin power and signal connector. A power adapter or mating cable required for operation. See Accessories page.

Display : LCD, 0.39″ (10 mm) digits (only in LPM).

Enclosure Rating : IP10 (NEMA 1).

Weight : 0.23 lb (101 g).

Agency Approvals:CE.

Product Literature


Catalog Pages

Shopping Cart