FineTek TRX Universal Temperature Transmitter
One transmitter for almost any sensor: the FineTek TRX accepts thermocouples, PT100/resistance inputs, voltage and current, and converts them to an isolated, loop-powered 4–20 mA signal, with a local LCD for set-up.
How It Works
The TRX reads the input signal, linearises it and outputs a proportional 4–20 mA current on the same two-wire loop that powers it. 1500 V galvanic isolation separates input from output to block ground loops and noise.
Key Features
- Universal input: thermocouple K, J, T, E, R, S, B, N; PT100 / 0–400 Ω; 0–500 mV to 0–20 V; 0–20 / 4–20 mA
- Loop-powered 4–20 mA output with linear current response
- 1500 V galvanic isolation
- LCD display with three push-buttons for configuration
- Communication port for programming
Applications
- Converting thermocouple or RTD signals for PLC and DCS inputs
- Retransmitting voltage or current signals with isolation
- Furnaces, ovens, boilers and process heating
Frequently Asked Questions
Which sensors can the TRX accept?
Thermocouple types K, J, T, E, R, S, B and N; PT100 or 0–400 Ω resistance; DC voltage up to 20 V; and 0–20 or 4–20 mA.
Does the TRX need a separate power supply?
No. It is loop-powered from the 4–20 mA loop (FineTek lists 18–32 Vdc supply).
Is the output isolated?
Yes, with 1500 V galvanic isolation.
Celectric supplies FineTek instruments across Malaysia from Penang. Contact us for pricing, lead time and application advice.
