Contrec 515 Ideal Gas Flow Computer (GC01)

Utility gas custody transfer and fiscal metering customers need flow readings that hold up to scrutiny, and that means catching any pulse miscount, not just measuring volume. The Contrec 515 GC01 Ideal Gas Flow Computer is built for this, using a frequency volume flow input with dual-channel quadrature tracking.

It takes the frequency flow signal along with temperature and pressure inputs, and works out gas compressibility and actual gas quantity in real time using standard equations of state, so the volume and mass reading reflects real gas behaviour, not an assumed constant density.

The quadrature input gives ISO 6551 Level B pulse security, so pulse miscounts on the flow signal are caught rather than silently passed through, which matters for fiscal loops and custody transfer operations where the numbers need to be defensible. It comes in a weather-tight IP65 housing built for field use.

Before we quote this, we would normally check your flowmeter’s quadrature output, your gas composition, and your line pressure and temperature.

Hope this helps.

Contrec Model 515 GC01 Technical Specifications
● POWER SECTION
Power Supply Options115 Vac ±15% standard
230 Vac ±15% option (Model code selection E)
12 to 28 Vdc external field loop power input
Transducer Power OutputAdjustable 8 to 24 Vdc sensor excitation voltage regulated via software controls; maximum continuous current capacity up to 50mA.
Memory & Data SecurityNon-volatile flash memory permanently stores accumulative volumetric totalizers, data logs, hardware constants, and system configurations during full plant power failure events.
● INPUT SECTION
Flowmeter Signal InputSingle or dual frequency input channels supporting Quadrature Pulse Signals for maximum transmission security.
Compatible Types: Low-level millivolt, contact closure reed switches, Namur proximity sensors, or open collector pulse trains.
Frequency Range: 0Hz minimum to 10kHz maximum signal bandwidth.
Compensation Analog InputsAnalog Temperature Input: RTD (Pt100) or linear 4 to 20 mA process loop.
Analog Pressure Input: 4 to 20 mA active linear transmitter input.
● OUTPUT SECTION
Analog Retransmission LoopFully isolated 4 to 20 mA DC current loop retransmission output channel with programmable range scaling.
Digital Pulse RetransmissionOpen collector transistor output featuring software-defined volumetric scaling factor and adjustable pulse width duration.
Serial InfrastructureRS-232 Port: Dedicated port optimized for direct PC terminal setup or local ticket receipt printing.
RS-485 Port (Optional): Multi-drop serial bus supporting robust long-distance plant networking.
Supported Protocols: Modbus RTU (Slave), standard Ticket Printer, and Contrec command-line protocols.
Local Display ScreenBacklit alphanumeric LCD display showcasing raw Volume, Volume Flowrate, Corrected Volume, Corrected Flowrate, Mass, Mass Flowrate, Temperature, Pressure, and Compressibility Factor.
● PERFORMANCE
Calculation AccuracyBetter than ±0.01% of reading for all internal flow metrics, mass equations, and mathematical gas density calculations.
Analog Transmittance PrecisionBetter than ±0.05% of full scale range under reference conditions.
Data Logging MatrixReal-Time Clock (RTC) event log memory block capturing over 1,000 entries for continuous process audit tracking.
● PHYSICAL
Mechanical Housing LayoutMolded field-mounting enclosure utilizing high-rigidity impact polymers (Optional flush panel mount, pipe track mount, or deployment within a heavy Ex410 explosion-proof housing).
Tactile Operator ArrayRobust elastomeric keyboard layout providing precise tactile user input feedback.
● STANDARDS CONFORMITY
Environmental SafeguardingStandard IP65 weatherproof frontal fascia shield protection.
*Note: Conformal PCB coating (Option C) is required for maximum environmental operating range and to avoid damage from moisture and corrosion.

Download Contrec 515 Ideal Gas Flow Computer (GC01) information here

Datasheet: Contrec_515-GC01_Datasheet 
Manual: Contrec_515-GC01_Manual

Shopping Cart


Do you want to hide this popup?