- Universal continuous/switching version, i.e. reduced stocks
- 100 ms cycle time, i.e. also suitable for fast control loops
- 20ms as shortest pulse for very fast / strong actuators
- Freely configurable analog output, e.g. as process value output
- Customer-specific linearisation for all sensors
- Settings can be blocked via password and internal switch for high security
- Extended temperature range up to 60 °C allows mounting close to the process
- Easy 2-point or offset measurement correction
- Emergency operation after sensor break by means of the “output hold“ function
- Logical combination of digital outputs, e.g. for general alarm
- Programmer with 10 segments and “end“ signal
- RS 422/485 Modbus RTU interface
- Built-in transmitter power supply
- Splash-water proof front (IP 65)
| Product Category: | Single Loop Controller |
| Dimensions and size: | 96m x 48mm x 118mm (HxWxD), 1/8 DIN |
| Connectors: | Pin or screw terminals |
| Primary Input Type: | Universal (TC, RTD, DC linear mA/mV) |
| Other Inputs: | External setpoint, Heating current monitoring |
| Output Type: | Relay, Logic, Continuous, Optocoupler |
| Max. Number of Outputs: | 3 |
| Scan Time: | 100 ms |
| Control Type: | 2-point (on/off), continuous PID control, or 3-point stepping |
| Number of Programmer Segments: | 10 |
| Power Supply: | 90-260 VAC, 20,4-26,4 VAC: Frequency 48-62 Hz, 18-31 V DC |
| Communications: | Modbus RS422/485 |
| Panel Sealing: | IP65 |
| Certifications: | CE, cULus, DIN EN 14597, GOST-R |
| Software Tools: | BlueControl |
| Brochure | Datasheet | Manual (Full) | Interface description |
 |  |  | |
| Bedienhinweis | |||
 |
KS 50-1 Tcont – Temperature controller for tempering units and hot runners
| Datasheet | Operation notes |
 |  |
Related products
West CAL 9300 Single Loop Temperature Controller
The CAL 9300 1/16DIN temperature controller is designed to be easy-to-use and reliable within the most demanding process and manufacturing applications.
West PMA KS 40-1 Universal PID Temperature Controller
The universal temperature controller KS 40-1 is intended for universal, precise, and cost-effective control tasks in all branches of industry. For this, the unit provides simple 2-point (on/off) control, continuous PID control, or 3-point stepping control. The process value signal is connected via a universal input. A supplementary analog input can be used for heating current measurement or as an external setpoint input.
West MAXVU8 Digital Temperature Controller
The new MAXVU is a cost effective temperature controller which is fast to configure, has improved display visibility and reduces costs by minimising wiring and panel space.
