Temperature Input: 4 – 20mA
Standard Options: 4 – 20mA Outputs
Power Supply: 240VAC
Special Options: No Option
The Contrec 415 Steam and Gas Flow Computer incorporates the following compensation equations for gas and vapors. Ideal Gas Law uses temperature and pressure correction, but where compressibility correction is not required. General gasses where compressibility is calculated using the Redlich-Kwong¹ state equation. This equation is suitable for gasses that have known properties, and information on common industrial gasses is provided in the operating manual. Natural Gas uses the NX-19² equation to calculate super compressibility. Steam Equations for both saturated and superheated steam. Mass and energy flow rates are calculated using standard equations to determine steam’s specific weight and enthalpy.
The backlit alphanumeric display simplifies programming and provides a clear indication of all parameters, as well as engineering units. Contrec 415 is fully programmable and all operating parameters are entered via the front panel keypad. The instrument is available with direct RTD input (415R) or 4-20mA temperature inputs (415A). Both accept a 4-20mA pressure input. Contrec 415 gas flow computer inputs from a wide range of flowmeters are taken, including vortex, turbine, orifice plate, averaging pitot tubes, wedges, and target flowmeters.
Also, where two differential pressure transmitters are used across an orifice or similar device, to increase the measured flow range, both DP transmitter inputs are accepted and scaled separately with automatic crossover.